Carbon Resistor 15K Ohm 1/2Watt

Carbon Resistor 15K Ω 1/2Watt (0.5W) Through Hole

The Carbon Resistor 15K Ohm 1/2Watt (0.5W) through-hole is a carbon-film fixed resistor in the CR series designed for general-purpose electronic use. In the CR family it corresponds to the 1/2 W power class and follows the standard cylindrical, axial-lead through-hole form factor. The component is constructed on a ceramic core with a deposited carbon film that establishes its 15Kohm resistance value, then coated with epoxy for insulation and mechanical protection.

As a 0.5 W carbon-film resistor it delivers stable resistance at room temperature and is intended for low-to-moderate power dissipation applications. Temperature coefficient and tolerance follow the CR series specifications (tolerances ±5% standard, ±2% option), and the part is tested for load-life, humidity and pulse overload performance according to the CR series test methods (JIS C 5202). It shows predictable drift characteristics within the specified limits after stress tests.

Because of its compact size (bulk dimensions for the 1/2 W CR type) and robust epoxy coating, this 15K Ω 0.5 W resistor is useful where a reliable, low-cost passive resistor is required. It is solderable per the supplier’s solderability and solder-heat recommendations and offers long service life (use life ≥10,000 hours under rated conditions).

Features:

• Carbon-film fixed resistor, through-hole (CR series).
• Rated power class: 0.5 W (1/2 W).
• Standard tolerance: ±5% (±2% available).
• Ceramic core with high-stability carbon film.
• Epoxy resin coating for insulation and solvent resistance.
• Tinned copper leads (suitable for reliable soldering).
• Withstands standard load-life, humidity and pulse overload tests (per JIS C 5202).

Specifications:

Specification:	Details:
Product family:	CR series – Carbon film fixed resistor
Resistance:	15K Ω (nominal)
Rated power:	0.5 W (1/2 W)
Tolerance:	±5% standard (±2% option)
Temperature coefficient:	See CR series TCR table (10 Ω – 47 MΩ: ±350 ppm )
Operating temperature range:	−55 °C to +155 °C
Bulk dimensions (typical for 1/2W):	L ≈ 9.0 mm Ø ≈ 3.5 mm lead Ø ≈ 0.50 mm
Insulation / withstanding voltage:	Insulation resistance >1000 MΩ see withstanding voltage table per power class
Life / reliability:	Use life ≥10,000 h under rated conditions failure rate ≤10 PPM
Solderability / solder heat:	Solderability ≥95% coverage solder heat per table (230 °C dwell tests)

Pinout Diagram:

Footprint Diagram:

Applications:

• General-purpose electronic circuits.
• Signal conditioning and bias networks.
• Current limiting in small-signal circuits.
• Pull-up / pull-down resistor in logic circuits.
• Repair, prototyping and educational kits.

Package Contents:

• 1x Carbon Resistor 15K Ω 0.5W Through Hole

مقاومة 15 كيلو أوم 1/2 وات ( 15K ohm Resistor) هي عنصر إلكتروني أساسي يستخدم في جميع الدوائر الإلكترونية، حيث تعمل على تحديد التيار وتقسيم الجهد.

تستخدم هذه المقاومة بشكل واسع في مشاريع Arduino، ودوائر LED، والأجهزة الإلكترونية المختلفة سواء المنزلية أو الصناعية، كما تتميز بثبات عالي وأداء موثوق.

15K ohm أستخدامات مقاومة

• LED تحديد التيار في
• Arduino دوائر
• (Voltage Divider) تقسيم الجهد
• الدوائر الإلكترونية العامة
• الأجهزة المنزلية والصناعية

 

This product works well with 1/2 Watt resistor .

Package Contents:

1x Carbon Resistor 15K Ohm 1/2 Watt Through Hole

Download Datasheet